Timing anyone?

Go here to post pictures, videos, car finds, meet interesting new people, and tell us how your car is coming along.

Moderators: 89ARIES, Webmaster

Timing anyone?

Postby Quickmr2 » Tue Jun 19, 2012 6:06 pm

Okay,
So, I know you all have helped me out soooo much so far; though I am going to ask 1 last favor. What are the 2 wires I need to disconnect in order to time my car. Also, where are they located. Geese, I wish I had a shop manual for this car. I got the Plugs, Cap, and Rotor for it. Then, I'm off to the smog station for my free retest. Ooooh yea, I forgot, I talked to this one mechanic and he told me to use a jumper cable and disconnect my battery, but connect the 2 cables together and it will clear the system ecu from trouble codes. Is this true. BTW I have a 1985 Chrysler La Baron Turbo Convertible.
Quickmr2
 
Posts: 0
Joined: Sun Jun 10, 2012 2:28 am
Car Information: 1985 Chrysler LeBarron Convertible Turbo

Re: Timing anyone?

Postby K-CAR_WAGON » Tue Jun 19, 2012 6:42 pm

I think the engine coolant temp sensor needs to be disconnected. Not sure about anything else being disconnected to set timing. This is a link to some general information about setting timing on a 2.2 from another forum. Not sure if its exactly applicable to your year vehicle.

http://www.turbododge.com/forums/f4/f14 ... g-2-a.html

http://minimopar.knizefamily.net/fault/code22.html


In regard to the procedure for clearing out the codes. Disconnecting the battery for a sufficient length of time is one way to clear the codes. Not sure that I would recommend a jumper on the disconnected circuit to quickly discharge the computer. Typically when you want to discharge a circuit that is retaining a residual charge it is better to use a bleed resistor than a direct jumper. Its safer to just disconnect the battery and leave it off for awhile.

BTW some states require a number of fault free turn-on cylces following a code clear to pass inspection.
K-CAR_WAGON
Car Fan
 
Posts: 54
Joined: Tue Sep 29, 2009 5:42 pm
Car Information: Plymouth, Reliant Wagon, 1983

Re: Timing anyone?

Postby Quickmr2 » Tue Jun 19, 2012 6:52 pm

Thank you. I actually just replaced that sensor so I know exactly where it is at. Thank you for your help.
Quickmr2
 
Posts: 0
Joined: Sun Jun 10, 2012 2:28 am
Car Information: 1985 Chrysler LeBarron Convertible Turbo

Re: Timing anyone?

Postby SgtSylund » Tue Jan 15, 2013 8:06 pm

Mini-Mopar switched server host. New link is: http://www.minimopar.net/
User avatar
SgtSylund
 
Posts: 0
Joined: Sun Jan 06, 2013 2:17 pm
Car Information: 1987 Plymouth Reliant Wagon LE, 2.5L


Return to Daily Updates & Club Projects

Who is online

Users browsing this forum: No registered users and 12 guests