by MGordon » Tue Nov 18, 2014 9:55 pm
Is there a seperate wire that runs off the wiper motor that is supposed to ground it. I noticed a black wire with a round female plug, in the harness next to the wiper motor. The motor of course has a plug for 4 wires, I noticed a spare blade terminal on the wiper motor. I am not sure if the ground wire is missing. When I had the wiper motor housing touching the studs on the cowl, it works. I had replaced the turn signal/Wiper switch, think that was it, along with the wiper motor. I forgot to look at some of the junk K-Cars at the salvage yard to see how they are wired up. I also have to replace the bushings on the linkage.