by 1of10K » Mon Feb 16, 2009 3:44 am
Just an idea I learned when trying to find the exact type of upholstery for a '83 Lebaron T & C Mark Cross I had some time back: The drivers side and passenger side upholstery and padding will interchange from side to side. If you can get a passenger side upholstery set, it will be an exact match for the drivers, both the back and the bottom of the seat. After you install passenger upholstery on your driver's seat, the stem for the recliner will push out a little on the new upholstery and you can easily make a small cut to install the handle. I did this on my T & C with excellent results (if you don't have one, get a hog ring pliers and rings, easy to use, low cost, and mandatory if you do the swap). Hope this might help you or someone else..