Imagine my surprise after driving it for 20 miles last night with no trouble, and then it shut off on the way to work this morning.
It turns out that I got the code 11 before cranking the motor. So the p/u assy. is sending a signal, if I crank the motor the code goes away. This is what should happen.
So I'm back at square one.
Tomorrow my Dad and I are going to go at it with a test tool, and check everything.
According to the article about no engine feed posted by kcar, the only other thing it could be component wise is the ignition switch, or the ecm. The 4 culprits of this condition are the ESD, the P/U assy, the ecm and the ignition switch.
Wish me luck.