Page 1 of 1

Entry light replace

PostPosted: Fri Jul 31, 2015 3:58 am
by Teressa
I have a 1985 dodge600 convertible, and need to know how to replace the entry light in the front drivers door.

Re: Entry light replace

PostPosted: Tue Aug 04, 2015 3:29 am
by Teressa
Got the plastic cover off. Now need to get new bulb. Problem solved I hope. Just didn't want to break cover. Would probably not be able to replace.

Re: Entry light replace

PostPosted: Tue Aug 04, 2015 2:06 pm
by Kwagon2
Good for you that you figured it out , with long term ownership of these cars (K body) you basically have to become your own expert on the specifics of the car you have. I've found that the service industry is of no help at all with anything older...(it also appears they have trouble repairing the "new" stuff!) Even on this site the folks are familiar with what they own and work on ...I haven't see a Dodge 600 on the road around here for at least 20 years! Get a service manual if you plan on keeping the car for a long while. I don't know whats out in B.C. for wrecking yards but I can imagine that there isn't much and you can forget about Chrysler for parts! I've had a tough go finding parts for my Aries wagon but I have found a few "pockets" with a couple of Dodge 400 converts in the mix... but not much else... bottom line is take care of that car it might be rarer than you think !!!

Re: Entry light replace

PostPosted: Thu Aug 06, 2015 5:21 am
by Teressa
Thanks for the encouragement central Canada. :)