88 Aries 2dr - turbo engine - part out

Moderators: 89ARIES, Webmaster

88 Aries 2dr - turbo engine - part out

Postby capev86 » Thu May 02, 2013 1:46 am

original 88 Aries 2dr 5spd base model w/ a 2.2 turbo engine swap done a couple owners back.
Image

selling (make respectable offers):

2.2 turbo engine. it "might" be a T2 motor since it had a 2 piece intake on it (seen in photos) but i bought it with an 89+ one piece intake. it also came to me with a garret T2 turbo and intercooler setup (keeping those)
Image
Image
Image

maroon interior (minus 5spd console and clutch pedal assembly)
Image

hbyrid SMEC 88tbi/89turbo wiring harness using wiring from a turbo caravan
Image

NOS Lebaron cluster bezel (cost me $80)
Image

1-1/8" front sway bar from an 89 Spirit ES turbo. a slight upgrade for the standard bar found on a run of the mill K car.
Image

Blue Aries/Reliant glove box door.
Image
capev86
Car Fan
 
Posts: 104
Joined: Fri Jan 11, 2008 9:45 pm
Location: Eliot, Maine
Car Information: 1986 Dodge Aries Wagon LE 2.5

Re: 88 Aries 2dr - turbo engine - part out

Postby romankaminskiy » Fri May 10, 2013 12:58 pm

Hello, Please tell me, possible cut front pillars left and right sides from your cars if it w/o rust in this places? for it good any aries reliant lebaron's 4 door sedans up to 1989 years. I need complete front pillars possible full with door hinges. my email for details and pics: roman.kaminskiy@gmail.com

thanks,
Roman
Plymouth Reliant SE 1983 2.2L AT
User avatar
romankaminskiy
 
Posts: 0
Joined: Wed Jan 05, 2011 12:54 pm
Car Information: Plymouth Reliant SE 1983 2.2L AT

Re: 88 Aries 2dr - turbo engine - part out

Postby capev86 » Sat May 25, 2013 7:29 pm

Glove Box Door is SOLD

Anyone wanting 2dr (maroon) interior parts, drop me a line. I need all these parts out of my shed and will haul it all off to the junkyard soon!
capev86
Car Fan
 
Posts: 104
Joined: Fri Jan 11, 2008 9:45 pm
Location: Eliot, Maine
Car Information: 1986 Dodge Aries Wagon LE 2.5

Re: 88 Aries 2dr - turbo engine - part out

Postby Dodge Aries K » Sun May 26, 2013 1:49 am

This distance is just so awful otherwise I'd be all over those seats...
Dodge Aries K
 

Re: 88 Aries 2dr - turbo engine - part out

Postby capev86 » Tue May 28, 2013 3:07 am

i probably won't toss those maroon buckets, but i'm tripping over what to me is essentially junk since it won't work on a k wagon with an almond interior. it does suck that i'm in the far corner, away from most K car enthusiasts.
capev86
Car Fan
 
Posts: 104
Joined: Fri Jan 11, 2008 9:45 pm
Location: Eliot, Maine
Car Information: 1986 Dodge Aries Wagon LE 2.5

Re: 88 Aries 2dr - turbo engine - part out

Postby Mitch340Duster » Wed May 29, 2013 4:24 pm

If you're gonna hack the car up let me know. If I can't sell mine I might keep it but I'll need some sheet metal sections. Floor/rocker panel areas, etc. thanks good luck
Mitch340Duster
 
Posts: 0
Joined: Tue May 21, 2013 1:52 pm
Car Information: 1987 Plymouth Reliant wagon

Re: 88 Aries 2dr - turbo engine - part out

Postby 89ARIES » Wed May 29, 2013 6:27 pm

The West Coast and Washington seem to have the most Ks. Maine does suck for K-cars. There was a gray 83 E-Class for sale in your state four months ago in pristine shape.
User avatar
89ARIES
Chysler K Car Club Founder
 
Posts: 1851
Joined: Fri Aug 17, 2007 2:04 am
Location: Sylmar, California
Car Information: 1989 Dodge Aries

Re: 88 Aries 2dr - turbo engine - part out

Postby capev86 » Wed Jun 05, 2013 2:38 am

Maine does suck for K-cars


for the most part i agree, but a few nice examples do pop up every few months.

but I'll need some sheet metal sections. Floor/rocker panel areas, etc.


sorry, but those are the very pieces i need for my car. i had to go to the Carolina's for this, although i have seen some good 4 door candidates closer to home come up for sale every once in awhile. i didn't just need fresh sheet metal, i also wanted the 87/88 5spd console for my wagon as well as needing the corresponding bracket welded to the floor and other bits like clutch/brake pedal combo, etc. my car survived the 15 or so New England winters (and subsequent salt spray) that it saw, relatively intact. what really did it in was sitting in my parents back yard, adjacent to the leach field for ten years. the undercarriage got inundated with moisture. the rockers are GONE and there are a couple holes in the floor that date back to when it was still on the road and just got a quickie patch job.
capev86
Car Fan
 
Posts: 104
Joined: Fri Jan 11, 2008 9:45 pm
Location: Eliot, Maine
Car Information: 1986 Dodge Aries Wagon LE 2.5

Re: 88 Aries 2dr - turbo engine - part out

Postby capev86 » Mon Jul 01, 2013 12:30 am

will be pulling the engine and trans and any other remaining parts in the next few weeks. body man finally started the restoration on my K wagon last week (blasted the rear qtr panels around the wheel wells and then moved it into the shop). he will need to start cutting patches out of this one pretty soon and the hope is to haul what's left right to the junkyard. i need every extra parking place at the house i can get!
capev86
Car Fan
 
Posts: 104
Joined: Fri Jan 11, 2008 9:45 pm
Location: Eliot, Maine
Car Information: 1986 Dodge Aries Wagon LE 2.5

Re: 88 Aries 2dr - turbo engine - part out

Postby 89ARIES » Mon Jul 01, 2013 6:11 am

Please, post videos, oh please. 8-)
User avatar
89ARIES
Chysler K Car Club Founder
 
Posts: 1851
Joined: Fri Aug 17, 2007 2:04 am
Location: Sylmar, California
Car Information: 1989 Dodge Aries

Next

Return to Buy and sell a Classic K-car

Who is online

Users browsing this forum: No registered users and 10 guests

cron