Page 1 of 1

1991 PLYMOUTH SUNDANCE squeeking

PostPosted: Tue Apr 17, 2012 10:37 pm
by inrltd
STILL SQUEEKING Q@!@!@


bought polybushings online .. put them on bought new alternator and belt.. still squeeking like crazy~~!~

its squeeks really bad when i accelerate and morderatly loud when im idle..

i ran the car without the ac belt on .. and it still squeeks.. :evil:

Re: 1991 PLYMOUTH SUNDANCE squeeking

PostPosted: Tue Apr 17, 2012 11:12 pm
by K-CAR_WAGON
Did you check the output voltage to be sure it is being regulated properly and taht the alternator is not be driven constantly for max output? Are the pulleys in good shape and aligned with respect to one another. Tension set properly? Did you try slightly altering the tension? Bent mounting bracket?

Also, look at this link on the Turbo Dodge forum. Among other potential problem sources described there was a technical service bulletin in 1990.
http://www.turbododge.com/forums/f4/f15 ... queal.html

Re: 1991 PLYMOUTH SUNDANCE squeeking

PostPosted: Wed Apr 18, 2012 3:05 am
by inrltd
thanks alot im going to order the new part and if that dont work ill change water pump