The Chrysler K-Car Club

I have been trying to get the lock cylinder out but it wont come out im taking it out cause I lost the key so I was going to get a new 1 but I cant get it out I have all the bolts out that hold it in.could it be that I broke a drill bit off in it?

I haven't had to remove mine but know sometimes there can be a small set screw in place, that has to be removed before you can pull the old ignition switch out. Maybe an allen head set screw?

Although both manuals are generally pretty worthless..Its probably shown in a Chiltens or Haynes manual.

Hello Joshua,

Can you email me some pictures of what it is you are talking about, plus some pictures of your georgeous car? Welcome aboard.

Sincerely,
Guy V.Coulombe
818-219-2587

Im not really sure how to send pics on here. I just tryed adding a pic to the feed but it says its to large the max is only 200 something kib

..

It was a little helpfull but it still wont come out. Im pressing the butten on the switch and trying to push it out but I shoved a drill bit in it awhile back and it broke off in there is that stoping it from comeing out???

Thanks for everyones help I finally got it out