Come here to help us help you in keeping that car alive. This ongoing project repair site is due in part to the work of Justin Paulson and many others on this forum.
Moderators: 89ARIES, Webmaster
by joshuafisher » Fri Aug 01, 2014 5:50 pm
I have been trying to get the lock cylinder out but it wont come out im taking it out cause I lost the key so I was going to get a new 1 but I cant get it out I have all the bolts out that hold it in.could it be that I broke a drill bit off in it?
-
joshuafisher
-
- Posts: 0
- Joined: Tue Jul 29, 2014 5:33 pm
-
by 1987dodgearies » Sat Aug 02, 2014 3:42 am
I haven't had to remove mine but know sometimes there can be a small set screw in place, that has to be removed before you can pull the old ignition switch out. Maybe an allen head set screw?
Although both manuals are generally pretty worthless..Its probably shown in a Chiltens or Haynes manual.
-
1987dodgearies
-
- Posts: 1
- Joined: Thu Jun 26, 2014 8:33 pm
- Car Information: 1987 Dodge Aries base model sedan
by 89ARIES » Sat Aug 02, 2014 4:41 am
Hello Joshua,
Can you email me some pictures of what it is you are talking about, plus some pictures of your georgeous car? Welcome aboard.
Sincerely,
Guy V.Coulombe
818-219-2587
-
89ARIES
- Chysler K Car Club Founder
-
- Posts: 1851
- Joined: Fri Aug 17, 2007 2:04 am
- Location: Sylmar, California
- Car Information: 1989 Dodge Aries
-
by joshuafisher » Tue Aug 12, 2014 4:45 pm
Im not really sure how to send pics on here. I just tryed adding a pic to the feed but it says its to large the max is only 200 something kib
Last edited by
joshuafisher on Tue Aug 12, 2014 5:07 pm, edited 1 time in total.
-
joshuafisher
-
- Posts: 0
- Joined: Tue Jul 29, 2014 5:33 pm
-
by K-CAR_WAGON » Tue Aug 12, 2014 5:06 pm
..
Last edited by
K-CAR_WAGON on Fri Dec 26, 2014 8:48 pm, edited 1 time in total.
-
K-CAR_WAGON
- Car Fan
-
- Posts: 54
- Joined: Tue Sep 29, 2009 5:42 pm
- Car Information: Plymouth, Reliant Wagon, 1983
by joshuafisher » Tue Aug 12, 2014 5:21 pm
It was a little helpfull but it still wont come out. Im pressing the butten on the switch and trying to push it out but I shoved a drill bit in it awhile back and it broke off in there is that stoping it from comeing out???
-
joshuafisher
-
- Posts: 0
- Joined: Tue Jul 29, 2014 5:33 pm
-
by joshuafisher » Tue Aug 12, 2014 5:47 pm
Thanks for everyones help I finally got it out
-
joshuafisher
-
- Posts: 0
- Joined: Tue Jul 29, 2014 5:33 pm
-
Return to Lets fix/restore/maintain your Classic K-Car
Who is online
Users browsing this forum: No registered users and 33 guests