1988 Aries Radio Power Issue

Come here to help us help you in keeping that car alive. This ongoing project repair site is due in part to the work of Justin Paulson and many others on this forum.

Moderators: 89ARIES, Webmaster

1988 Aries Radio Power Issue

Postby Blasirl » Mon Oct 15, 2018 4:34 pm

Hello all,

I just completed a new install with a pioneer radio, a new antenna, a signal booster using metra parts, nice soldered joints and such and just realized that there was no power coming from the fuse block. The fuse is good, but I did notice the fuse block was loose from before I had it.

Is there something specific I should be looking for? I do have the manual set, but thought I would throw out the question while it was still fresh in my mind.

Thanks in advance for any help you might provide.
Blasirl
 
Posts: 19
Joined: Mon Mar 21, 2016 10:06 pm
Car Information: 1988 Dodge Aries Limited SE 2.2?

Re: 1988 Aries Radio Power Issue

Postby Kwagon2 » Thu Oct 18, 2018 3:04 pm

Hi
The fuse box is normally supported on a small bracket and can be pushed free so the back can be inspected to see if the factory radio power lead is still attached to the fuse cavity. If the fuse box was loose it could be that some connections may have been played with in the past sometime. The radio fuse should be cavity 15.
Kwagon2
Car Fan
 
Posts: 140
Joined: Tue Jun 09, 2015 2:46 pm
Car Information: '82 Aries Wagon,'85 Reliant SE,'82 Reliant Wagon


Return to Lets fix/restore/maintain your Classic K-Car

Who is online

Users browsing this forum: No registered users and 1 guest