The Chrysler K-Car Club

hey all!!
I'm trying to make heads or tails out of wiring my Rampage for TBI
I removed harnesses, steel lines, computer and such from a 1989 Dodge Omni
I'd like to install it's TBI injection to my truck.... the carb, smog pump, and the thousand vacuum lines have been removed.
But its all different,
Omni's have combination turn signal, /side marker lights and only 2 headlights as mine has 4 headlights.
anyone done this before?
Any insight?
Mike

post this at

turbododge.com

turbo-mopar.com

For your headlights 2 of the four will have 3 prongs just like the Omni, 1 ground 1 high beam and 1 low beam. The other 2 headlights will only have 2 prongs 1 ground and 1 high beam. The turn signal marker light combo will have bulbs that have 2 circuits in them, the brighter one for the turn and the less bright one for marker light. Hope this helps some.