86 T&C stuck in limp mode. HELP!!

Go here if you can't find the answers to your car's problems

Moderator: 89ARIES

86 T&C stuck in limp mode. HELP!!

Postby ChryslerTC1986 » Fri Aug 30, 2019 11:57 am

hi guys (and maybe ladies?), I've been running into an issue on my 1986 Chrysler 2.5 town and country where the damn thing is stuck in limp-in mode. I can tell this because the radiator fan kicks on as soon as I put the key into ACC position before I turn on the car and I've noticed that the car is running rich. my O2 sensor wire has a break in the wire sheathing but I'm not sure if this would send the car into limp in mode. I changed the CTS b/c I was seeing a code 22 (coolant temperature sensor out of range) but that didn't seem to it.. its looking like there might be something with the circuitry. does anyone here know how to best test this so I can figure out what the problem is? I can post the schematic from my Haynes manual.
ChryslerTC1986
 
Posts: 2
Joined: Mon Aug 19, 2019 2:36 pm
Car Information: Chrysler Lebaron T&C 1986 2.5 non-turbo

Re: 86 T&C stuck in limp mode. HELP!!

Postby mikey Cee » Sun Sep 15, 2019 2:44 pm

Hi fellow Chrysler enthusiast. Chimed in to not to help but to inform you that I think were pissin' in the wind around here anymore. I sent in a request for help a few weeks back and I got nothing but chirping crickets. Hell the tech types must have quit reading these posts all together. They used to come aboard every now and then to offer suggestions now the rats have seemed to jump ship lets us go down with it. Crap the moderator don't seem to give hoot anymore!! mikeycee.
mikey Cee
 
Posts: 15
Joined: Fri Sep 01, 2017 7:59 pm
Car Information: 1986 lebaron convertible less than 36,000 miles


Return to Technical Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron