Disk Brake Rotor Size Question

Come here to help us help you in keeping that car alive. This ongoing project repair site is due in part to the work of Justin Paulson and many others on this forum.

Moderators: 89ARIES, Webmaster

Disk Brake Rotor Size Question

Postby jco1971136 » Fri Apr 06, 2018 6:52 pm

Hi guys, I'm about to replace Front Shocks, Rotors and Brakes on my 88 Reliant but I have some questions.

The Rotors come in 2 sizes at the parts store (J.C. Whitney), 9 1/2" with 4 studs and 10 1/2" with 5 studs.
The problem I'm having is that the rotors on the front of my car are 9 1/2" with "5 Studs", but the only size I can find on the website are 9 1/2" with "4 studs".

Is it OK to replace the 9 1/2" rotor with 5 studs with the 10 1/2" rotor with 5 studs? I imagine this is just a Heavy Duty Upgrade but when I did the back Drum Brakes a few months ago the "Heavy Duty Replacement Springs Kit" was the wrong one and I had to use the old springs.

Not sure I'm explaining this right but I dont want to get it apart and then realize it's the wrong size and have to return the parts.

Thanks in advance for your help

Jim
jco1971136
 
Posts: 15
Joined: Mon Dec 07, 2015 6:45 pm
Car Information: 1988 Chrysler Reliant

Re: Disk Brake Rotor Size Question

Postby Kwagon2 » Wed Apr 11, 2018 4:16 am

Hi
By 1988 the four bolt wheel stud pattern was gone so I would question any listing that shows a four stud rotor for the 1988 model year. (Last used in 1985) Stick with the rotor size that's on your car that's not negotiable.
Napa and Rock Auto both show the 9 1/2" 5 stud Rotor in their On Line Catalogues.
Kwagon2
Car Fan
 
Posts: 137
Joined: Tue Jun 09, 2015 2:46 pm
Car Information: '82 Dodge Aries Wagon,'85 Plymouth Reliant SE


Return to Lets fix/restore/maintain your Classic K-Car

Who is online

Users browsing this forum: No registered users and 1 guest